The following sub-sections describe the slots and the expansion cards that they support. Today we are spoilt for choice. This pin port connects a parallel printer, a scanner, or other devices. Assign an IRQ to the card. Simultaneously press the retaining clips outward to unlock the DIMM.

Uploader: Zuludal
Date Added: 21 May 2008
File Size: 18.96 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 72773
Price: Free* [*Free Regsitration Required]

This prevents incorrect insertion when you connect the IDE cable. The contents of the support CD are raie to change at any time without notice.

PCI Express features point-to-point serial interconnections between devices and allows higher clockspeeds by carrying data in packets. Page 31 the default is the Space Bar. Refer to the connector description below for details. Read performance is improved since either disk can be read at the same time, meaning if one disk is busy the other is accessed.

The actual BIOS screen displays may not be exactly the same as 4prd1-mx.

How to set the RAID mode in BIOS? | Official Support | ASUS USA

Doing so can damage the motherboard. System Information Sub-menu items 2. This Mic pink jack connects a microphone.

Before you start installing the motherboard, and hardware devices on it, check the items in your asis with the list below. If you have other drives present, the possibility of other drives being set by default as the boot disc is likely.


Product introduction To use the Hyper-Threading Technology on this motherboard: Due to chipset limitation, DIMM modules with double-sided x16 memory chips are not supported in this motherboard. Some of the navigation keys differ from one screen to another.

Asus P4RD1-MX Troubleshooting Manual

Refer to the following sources for additional information and for product and software updates. Drives are typically added in multiples of two. You will then arrive at a screen, then take these four simple steps: The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen.

How this guide is organized This manual contains the following parts: Prepare your new system and ensure that you have written down or printed out the instructions if you do not have a notebook or tablet at hand. About This Guide Refer to the following sources for additional information and for product and software updates. Locate the CPU socket on the motherboard. Select Ok to discard any changes and load the previously saved values.


Failure to do so may cause you physical injury and damage motherboard components. Unlocked Ratio Actual Value: The bus frequency external frequency multiplied by the bus multiple equals the CPU speed. This pin port connects a parallel printer, a scanner, or other devices.

Discard Changes This option allows you to discard the selections you made and restore the previously saved values. Connect one end of the chassis intrusion sensor or switch cable to this connector. I know of 9 different kinds of RAID plus a performance RAID that has no redundancy built into it, however on everything outside of the high-end server environment you’ll only be offered the four main versions: Position the CPU above the socket such that its marked corner matches the base of the socket lever.

Security Settings Supervisor Password: These are not szta Setting to Auto enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled.